Introducing the High Residue Cultivator

Continuous organic no-till is still considered unachievable. However, options for reducing tillage in the mid-Atlantic region have been identified and tried, including: (1) rotating annual grain crops with perennial forages; (2) decreasing depth and degree of soil inversion (e.g. chisel plowing and disking in place of moldboard plow); or (3) no-till planting cash crops into cover crops that are mechanically killed. The latter approach has gained substantial popularity with the development and widespread availability of a relatively inexpensive roller–crimper for mechanically killing and flattening cover crop residue.

Cover crop-based, organic rotational no-till grain systems have focused on corn and soybean production in the mid-Atlantic region. Soybean is typically no-till planted into a fall planted cereal rye cover crop, whereas corn is more commonly planted into a fall planted hairy vetch cover crop.

Rodale Institute utilizes the innovative roller crimper, redesigned by Mr. Jeff Moyer – Rodale Institute Executive Director, as the primary weed control tool in organic rotational no-till corn and soybean production. This method involves simultaneously rolling a dense cover and planting a cash crop into the mulch layer using a modified no-till planter. The chevron shape of the crimper blades ensures that the stems of the cover crop are broken in so many places that they cannot recover and will create an evenly distributed mulch layer.

In normal years, the thick mulch suppresses weeds season long. However, unexpected weather conditions such as high precipitation at the time of rolling crimping, late planting of the cover crop in the fall, or rolling the cover crop before the effective termination growth stage, which is normally at flowering or anthesis, can result in substantial weed infestation.

An innovative tractor-mounted implement called a high residue cultivator is utilized as a “rescue” response to manage weeds in a rotational no-till system. The high residue cultivator has coulters (residue slicers) that cut through the cover crop residue mulch to create a path for the sweeps to ride under the mulch, just below the soil surface to cut weed tops from their roots or uproot them. Two press wheels on either side of the coulter press down firmly on mulch residues thereby facilitating clean slicing of the residues ensuring that sweeps riding under the mulch leaves the mulch intact and relatively undisturbed. This is important in ensuring that weed suppression from the mulch is not impaired.

If you have questions or would like more information, please contact Dr. Emmanuel Omondi, Research Director, Farming Systems Trial, at

3 Responses to “Introducing the High Residue Cultivator”

  1. Kevin Kruse

    Similar to one I designed that pulled the weeds between a counter rotating bottom roller and the krimper. Mine does not roll on the ground allowing it to set above the row crops to pull weeds higher then them. Common tent shields keep pulled weeds off of the crop rows,

    • Aaron Zimmerman

      Sounds interesting Kevin. Do you have pics or videos to share? Email me!

  2. Thomas Ryan

    Does anybody manufacture this high residue cultivator? I bought a roller crimper from I & J last year. The cultivators I & J currently show on their website do no look like the one described in this article – “Dig Deeper, Introducing the High Residue Cultivator.
    Tom Ryan
    Ryan’s Rose Organic Farm
    Batavia, NY


Leave a Reply